NOTE : Maximum of 3 can be programmed.

Please ensure time delays are maintained, otherwise procedure will not be completed correctly.

1. Turn ignition ON.

2. Within 4 seconds push the transmitter button aiming the transmitter at the receiver unit above the rear view mirror.

3. Within 4 second turn ignition OFF.

4. For additional remote controls repeat steps 1 to 4 within 4 seconds of pro-gramming the last remote control.

5. Turn ignition ON.

6. Within 4 seconds push the transmitter button aiming the transmitter at the receiver unit above the rear view mirror.

7. The door actuator should operate.

8. Within eight seconds aim the first remote control at the receiver and press the  transmitter button.

9. The door actuator should operate.

10. Within 8 seconds aim the second remote control at the receiver and press
the transmitter button.

11. The door actuator should operate.

12. Within eight seconds aim the third remote control at the receiver and press the transmitter button.

13. Turn ignition OFF, and remove key.

14. Confirm all remote controls operate.