Skip to content

Ford Puma Key Remote Control Programming


1. Turn Ignition switch to Position I and back to 0 as soon as the PATS LED in the clock lights (The system is now ready for programming, to a maximum time limit of 30 seconds)

2. Remove Key from Ignition, hold the FOB towards the Interior Light, and press and hold the Single Arrow. Wait until the light on the Key flashes, then press the Double Arrow 3 times., release the Single Button

3. Both LEDs (Key & Clock) should flash to acknowledge programming is successful

4. To exit learn Mode, turn Ignition to II and then 0

5. A Maximum of 4 Remotes are possible